There, after about an hour and a half of work it's done
There, after about an hour and a half of work it's done
Will
nice work, why did you put them in series instead of parallel?
results?
CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
GPU: 9800GTX /GTX780 hydrocopper
Ram: Samsung 4GB /gskill 16gb DDR3 1600
Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
PSU: Enermax Galaxy 850Watt /EVGA 850 G2
HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
Sound: Logtiech Z 5500
CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v
I ended up putting them in series because i wanted to make sure that both rads got all the water for max cooling, and not just took the path of least resistance. but theres not much of a difference in temps because i only have my cpu in the loop atm, so until i get the gpu block on monday we wont see a difference.
Will
Will
stupid me, it wouldn't work well in parallel as the rad sizes are different.
it should still have dropped cpu temps.
CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
GPU: 9800GTX /GTX780 hydrocopper
Ram: Samsung 4GB /gskill 16gb DDR3 1600
Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
PSU: Enermax Galaxy 850Watt /EVGA 850 G2
HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
Sound: Logtiech Z 5500
CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v
Looks nice. You might want to consider dropping a few bucks on a couple 45-degree fittings so you can have more of a straight shot instead of that tight loop. It just looks too close to kinking for comfort, imo.
TBCS 5TB Club :: coilgun :: bench PSU :: mightyMite :: Zeus :: E15 Magna EVThat we enjoy great advantages from the inventions of others, we should be glad of an opportunity to serve others by any invention of ours, and this we should do freely and generously.
--Benjamin Franklin
I agree with x88x, a couple if 45 degree fittings will really tidy up that transition between the 2 rads.
Project: Elegant-Li *NEW*
Project: Alpha FINISHED
Project: LEXA Revival FINISHED
Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08
O_o According to bios my cpu is running at -46C
Ive never really noticed but my cpu block is cold to the touch
Will
Have you updated the BIOS recently? I know that sometimes the BIOS temps can be very inaccurate.
Project: Elegant-Li *NEW*
Project: Alpha FINISHED
Project: LEXA Revival FINISHED
Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08
CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
GPU: 9800GTX /GTX780 hydrocopper
Ram: Samsung 4GB /gskill 16gb DDR3 1600
Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
PSU: Enermax Galaxy 850Watt /EVGA 850 G2
HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
Sound: Logtiech Z 5500
CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v
please tell me you have more than those 4 puny screws and that plastic bracket holding up those rads and all those fans!
Arctic Cat * Maximum Security * Cribbage Board * Rockin Case * Armor Redux
Tempest SXR * Power House * Red Comet * ICHIWZ * Acrylic Headphone Hook
Continuing sponsorship support from PCBoard.ca