Homemade WC?

[simon275]

Arent the flow rate on those things huge like in the like 500+ Litres per hour range and the pipes they take are fat like 1 1/4" tubing.

It would be pretty extreme to see one of those in a case some serious cooling.

Also they need their own 240v plugs as well they would draw a fair bit of power.

[tybrenis]

Nope - they are standard voltage, pump about 200-250 GPH, and many use 1/2" tubing.

[Omega]

Do it afroman style...

http://www.afrotechmods.com/stupid/water/water.htm

[.Maleficus.]

Do it afroman style...

http://www.afrotechmods.com/stupid/water/water.htm

Sweet... I would do that if I had a fish tank pump. I woundn't use it in my computer but it'd still be fun to have around.

[Omega]

Sweet... I would do that if I had a fish tank pump. I woundn't use it in my computer but it'd still be fun to have around.

Yeah. Afrotech is great. Go now.

[maximan1]

I HAVE IT!!!
I will take a beer bottle (my parents drink very small beer bottles) and cut off about an inch off the end. Then I will glue some sheet metal (forgot what it is called ) on the end so it cant leak out (the cooling stuff that is, not beer). Then I will cut off about 2 inches from the top of the bottle and also glue some sheet metal there. I will put 2 fans on top of each other on the top, and the bottom will be on the CPU. There will be 2 small hoses from each side, pushing coolant in and pulling coolant out.

Comments? Critisism?

Please reply

[blue73]

radiators will robably come fromcars or something, yubing can be anything, resevior anything thats watertight, blocks and uomps probably need to be bought

Could You use the rads that are in mobile AC units as they're a lot smaller than car rads. And by AC I mean air conditioner?

[monoflap]

I HAVE IT!!!
I will take a beer bottle (my parents drink very small beer bottles) and cut off about an inch off the end. Then I will glue some sheet metal (forgot what it is called ) on the end so it cant leak out (the cooling stuff that is, not beer). Then I will cut off about 2 inches from the top of the bottle and also glue some sheet metal there. I will put 2 fans on top of each other on the top, and the bottom will be on the CPU. There will be 2 small hoses from each side, pushing coolant in and pulling coolant out.

Comments? Critisism?

Please reply

Well, im guessing thats supposed to be a cpu water block. If it is you'll have to devise some way for it to conduct the heat from the cpu. If you have an old heatsink I bet you could chop it up and put the bottle on top or something. Also, is your cpu socket bases, or is it a slot kind of like an add in card?