Project N0NAME

[dgrmkrp]

... i bought some black spray cans, and the protective masks , not to OD on spray hihi... i also downloaded lots of pics of dragons (yeah, dragons). I'll buy some bondo and try to make my front panel better all in a days work, tomorrow, instead of going to a very important exam

[dgrmkrp]

..today i bought more bondo, some primer(finally found some) and sandpaper. Still, i'm not sure what to do next. A, i did flunk that maths exam

[dgrmkrp]

..long time, but i have some kind of progrees done: i bought a dremel! i've started developing my skills by cutting stuff from around and i reallt like the engraving/etching potential the tool offers also, i bought a new mouse (x-710, cheaper than other of its kind, but i do give it an A+) and a lil' chipset fan. I plan on modding them together with some lighting and a smallish switch (which will replace a button i don't like on the side...)

[dgrmkrp]

I'm doing some stuff now and taking pics.. i have a free weekend and i hope i can dedicate it completelly to modding my case.. i did run into a bit of badluck.. one of my cathodes died.. in pieces.. i don know if anyone else experienced this, but the darn thing broke insinde of its protective tube...

i'm making 2 blowholes for 2x80mm led fans or AC3 fans (forced by the case and psu to go this way, although 1x92mm could have fitted as well), 1 120mm exhaust and a hole in the psu cover.. everything will be then brushed/sanded, primed and painted metal-black... i've done 1 hole in the top, cut the psu cover, started to prime it.. now i'm doin the 120mm exhaust...
see you all later

[dgrmkrp]

Well.. i love paint fumes.. after 3 coats of primer, i've laid 2 of black... my hands are dirty as hell, i'm a bit tired of the noise (dremeling and hammering) and i feel a rush of adrenalin knowing that if the administrator finds me, i might get expelled :lol:

...

Hooray! I have 2 functional 80mm holes and the Harddrive bays is painted. So is the PSU cover.. I wanna add some mesh next.. Pics will be posted as soon as i finish and i intend to post them from my working PC.

[dgrmkrp]

I'm restless.. while the paint dries (not on my hands)....I did assemble my pc on the window... And i am writing on it right now

Back to the mod: I bondoed another layer on the front and i'm waitin for it do harden as well I also painted black some grills i will be using and i need to buy 2 more 80mm grills and one 120 mm grill and fan things are shaping up pretty well.. and the fact that i'm almost alone in the room helps

I went to about 6 cutting discs today and i have to buy another tomorrow

I also started modding some pcs in the room, while the owners are away A nifty lil fan on a vdo card, a side panel window on another.. practice is nice.. Ah, and i'm modding a phone!!! Paint job style

Pics will be up in 15mins.. i have to install the phone software...

[dgrmkrp]

for some reason, i couldn't post till now.. hmm.. 15 minutes )

so, here are the pics, although i'm still workin and i'm waitin for some parts:

case open, stuff laid on the bed

case empty, drawing cuts

old psu...

this panel is black, but it is covered in dust

PSU opened...

PSU cover cut..

i also cut the small vents facing the inside of the case... ugly job.. better airflow, i hope..

i cut the fan grill from the psu.. sorry for jerky blurry picture..

i love this ram-sinks

first hole cut..

back exhaust fan positioned for thinkin..

a small cut plus a bit of hammer action.. blurry again..

test fit of a small fan..

[dgrmkrp]

psu cover primed, but not on the inside.. i'm making a few economies, i need to prime the entire case..

two holes cut and a test fit.. dual fans plus grill..

blurry.. but there is another layer of bondo...

and bondo spells: breathing-mask helps me, but the room...

psu and mesh painted black..

i was getting bored of the metallic noises so i decided to put the pc back:

and here it is .. workin gud

a pick of painted grills..

but lots of nuts and bolts stayed on my bed.. no case, no bolts

more pics as the case develops..

[wingman358]

Lookin' good so far!

[ColModish]

i noticed that your bed has pinky flowers heheheheheh.....just kidding
looking good so far