-
Re: Project: Rockin Case
Looking Great so far...
but one thing come to my mind... and I know the fun part is to build...!!!
why you didn't use a real guitar and then cover it with the fiberglass or cabor fiber...
-
Re: Project: Rockin Case
well thats just no fun, plus I'd have to hack up a perfectly good guitar lol. I'm workin on it slowly, bit by bit, once I get a good update ready I'll post up
-
Re: Project: Rockin Case
interesting concept hope you finish soon
-
Re: Project: Rockin Case
thanks man, this projects going to be on hold for now, as I need $$ to finish it, and the wife and I are trying to get our bills payed off. our tax returns will take care of all our credit cards, then my truck will be paid off this summer, then all that will be left is my jet ski and her car. Once my trucks paid off I should be able to get back workin on this one again. Maybe small progress between now and then too we'll see. I'm workin on Monster though, because its a 90% free project, just my time.
-
-
Re: Project: Rockin Case
-
Re: Project: Rockin Case
another update! forgot the camera, so you'll have to deal with cell phone pics lol
another shot with the components layed out
holes drilled for mobo, mobo temporarily mounted here:
holes drilled and mounts set up for HDD
main neck piece cut out
and the part for the "string" mount
I didnt get any pics of that part finished unfortunately.
now, on the neck, I've set up the measurements for the head and base mounts, and figured I have a 1" x 13.5" strip to cut some kind of decoration out of each side of the neck. now to do up some drawings and figure it out!
-
-
Re: Project: Rockin Case
Yup, that'll definitely do it - I see some serious re-soldering in your future tho with only 3.5" of wire between each unit - that'll be way too much for half of them, and nowhere near enough for the stretch to the top of the bars. While you're at work with the soldering iron, why not remove that microswitch and replace it with a regular PTM switch accessible from the outside of the case - that way you can change the pattern without opening up the case
-
Re: Project: Rockin Case
well it comes as a kit, so I dont need to put that switch in to begin with
I like the idea on a remote switch though thanks!
anywho, small update.
I cut a small square out of the red plexi then cut in half to make two triangles. I then marked out a pattern on one side.
I then proceeded to sand away the profile
and the rough shape is done
mmm dusty lol
and another shot of the basic shape
and after some sandinge with 600 grit paper, there seems to be some high spots
so I hit it with a flexible sanding disc on the dremel. much better.
after I got it mostly smooth with the sand paper I put a buffing wheel on the dremel and used plastic polish in conjunction with the buffing wheel to shine it up
and these will be mounted on the neck as shown here, they will be the "supports" for the neck
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules