If it's a permanent installation, or at least somewhat permanent, You could buy a tube of silicone, and coat the sides of the drives with that.
Would be too difficult to remove.
Good idea though otherwise.
Anybody know of a cheap material with shock absorbing qualities/noise dampening qualities which is pretty much dielectric for use?
Sorry for double post, but would neoprene be a suitable material?
According to wikipedia it is commonly used for "noise isolation in white power transformer installations, and as padding in external metal cases to protect the contents while allowing a snug fit". As well as "electrical insulation" and laptop sleeves.
How about this?
http://www.organize.com/12x5black.html
I've used it in my tool boxes for years, I'd say that's it's plenty thick enough to dampen the minor vibrations you'll find in PC equipment (you can layer it for more dampening if needed), it has holes for ventilation, and it's cheap.
________
FERRARI F1/87
Last edited by blueonblack; 02-24-2011 at 02:53 PM.
I'll look into that, thanks.
Would this kind of thing work, do you guys think?
http://cgi.ebay.co.uk/Non-Stick-Rectangle-Orange-Silicone-Bakeware-Baking-Mat_W0QQitemZ270247393360QQcmdZViewItem?hash=item2 70247393360&_trkparms=72%3A12|39%3A1|65%3A12&_trks id=p3286.c0.m14
Only concern with that is that it's none-stick. Would I still be able to glue it or whatever?
I'd say the silicone baking mat would work, not sure how thick it is, might need more than one. As for gluing, silicone is made not to stick, but in my experience there is an adhesive for absolutely anything.
________
Honda Civic (Second Generation)
Last edited by blueonblack; 02-24-2011 at 02:54 PM.
How about felt? Pretty cheap, pretty heat resistant, can cut it to fit. I know it's used in musical instruments all the time, so it can reduce a lot of vibration. I'm not sure what sort of glue you will find that's both heat resistant *and* easy to remove though
Dr Scholls Moleskin.
http://www.drscholls.com/drscholls/p...p&searchArg=67