Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
Hi all, Im working on my newest project "Project Mr.Freeze. here are some pictures, i will get into deatail in about an hour!
http://rc18twebboard.com/P9230023.JPG
http://rc18twebboard.com/P9230021.JPG
http://rc18twebboard.com/P9190005.JPG
Ill post more pictures and ideas in a little bit!
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
what did you do? the side window?
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
Im getting together a list of everything thats on it, and some other pictures that specify stuff
But I custom did the window, and I custom cut the lexaan and custom cut the whole for the 80mm intake fan!
There is more that will be listed in a few!
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
ok so you just did the window and a hole for the fan. now how anout cleaning up that wire mess.
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
Ok, now for the good stuff!
I boght this computer as a barebones! This computer has no special name for it, since it is custom made! But I like to call it the Mr. Freeze 9000!
So Now introducing "Project Mr. Freeze 9000"
Stock Hardware:
83.1 GB Harddrive
556MB DDR Ram (1 Chip)(Using 1 out of 3 Ram Slots available)
AMD Sempron 2300Mhz Processor (Overcloking at 2600Mhz)
GeForce 4 Graphix card
Built in sound card (not sure what type)
DVD/CD-R/CD-RW Combo drive (top)
CD-R/CD-RW Drive (2nd down)
1 3 1/2 inch floppy drive
Huge Power Supply (Not sure what Voltage, but the dude at the comp store said that it could power 4 computers) :-)
UPGRADES
VIA RAID CONTROLER (Have installed but not hooked up to my other hardrives since there is no other harddrives in my beast as of now)
Nexus 3 Channel Fan controller with built in Cathode light converter
2 12' blue cold cathode lights that give it the Mr. Freeze look
Rounded IDE cable runing from board to Both Burners
Gold aluminum duel 4400RPM Harddrive cooler (controled by fan controler)
1 80mm 4 Blue LED Intake fan (3300 RPMS) (Controled by fan controler)
180mm Turbo Exahst fan (4000 RPMS) Controled by fan controler)
I took Some wire that had a mettal tubing look and wraped and ziptied around some of the wires that are more revealing! Again this contributes greatly to the mr freez effect!
Here are some more pictures of my beast!
Fan Controller and Burners
http://rc18twebboard.com/Fancontrolerandcddrives.JPG
Plain Picture of inside
http://rc18twebboard.com/Inside.JPG
Im not sure what these wires are for, but they sit INSIDE the comp, and are connected to a wire that runs from my motherboard to the front audio slots
http://rc18twebboard.com/audiowiresincomp.JPG
Small picture of bottom cathode
http://rc18twebboard.com/bottomcathode.JPG
Side Off Bottom Light on
http://rc18twebboard.com/bottomlitsideoff.JPG
Another picture of the above pose
http://rc18twebboard.com/bottomlitsideoff2.JPG
Cathode on side panel
http://rc18twebboard.com/coldcathodeonwindow.JPG
Computer Side View with lights on
http://rc18twebboard.com/compsideview.JPG
Another picture of the burners and fan controler
http://rc18twebboard.com/fancontrolerandcddrives2.JPG
View of the custom wire job i did for the wires coming off of my hardrive
http://rc18twebboard.com/customharddrivewires.JPG
view of hardrive cooler
http://rc18twebboard.com/harddrivecooler.JPG
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
Yea, ive veen trying to clean up the wires forever! man its a hard job! Expecialy with all the wires i have with cathode, fans, and other crap!
The only wire things I have to complain about now, is that flat IDE cable going to my hardrive, and the wires going up the hardrive and CD-ROM holders, i might pull them into the front where you cant see them
or
find someother way to convert them to my theme!
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
Ok, now, I have a problem, I can do 1 of 1 things!!
Im thinking of taking the rack out of the computer (the rack that holds the harddrive and crap, and painting it a dark blue!
or somekind of blue!
Do you guys think it would look better snow white? or 2 shades darker then the color of my cathodes?
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
The 1/8th in audio connectors are for the front audio jacks. It comes out the back of your case with a included pci slot cover and will go into your motherboard or sound card.
How did you come to trade the fiddle for the drum?
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
O, thank you for the information! Now i know what those are for!!!
Re: Project Mr. Freeze! Pictures! Custom Window Kit! IM ONLY 15!
AMDSempron: there is no 556Mb memory module and i dont think any sempron runs at 2.3Ghz, might be 2300+(the name) Please dont ask what colour you should paint ure case. it is your computer and you have to decide what you want. but i think pink would look great
Posting Permissions
Reply With Quote