Chiller's Level10 hybrid cooled

[Chiller]

because they don't work on SR-2, only Xeons with double QPI link

[x88x]

/\ This. i7's (or any consumer-level Intel CPUs) only work by themselves. To have more than one on a single MBB you have to use Xeons, for the reason Chiller noted.

[Chiller]

Today being busy with making place for all the usb cables, power led, hdd led etc to go away from mobo as fast as possible, not to show to much cables in case.
Also adjusting some things to get the mobo cover enlargement fitted on case,
used a lot of dremel cutting disks :

And because the Evga SR-2 mobo doesn't have condensators like a normal LGA1366 mobo around the socket, i needed to make some new socket isolation kits for around cpu with more amramflex, pictures will say enough :

And here you see the normal cut-out of a lga1366 socket kit and that for a Evga SR-2 mobo :

[Chiller]

just bended the alu plate in the same curve as the standard mobo cover also have :

The curve in the red circle, the green lines is untill where the mobo cover needs to get bigger for the bigger mobo :

[Chiller]

The original mobo cover has a serious cut-out for the adjustment,
and you see the four square holes for mounting the new alu plate :

This is the bottom of the original mobo cover, is a serious cut-out on,
so Quad sli GTX480 still fitts :

The new alu plate working on :

And here it's fitted on the case base plate :

Nice fit :

And with the base plate of the big Boreas Chiller,
you see that the ATX 24pin needs a cut-out, and two tubing with a BP fitting,
also the Coolit Freezone V1 needs his place in this plate :

And here you see what also needs to be cutt-out in alu plate :

[Chiller]

Update after some hours work :

the BP fittings are in place also the cutt-out for the ATX 24pin :

BP fittings close-up :

The outcome of the atx24pin :

Inside of the ATX24pin :

A Total overview with the motherboard and his power connectors installed for viewing cable routing :

CPU1 Close-up :

CPU0 Close-up :

ATX 24pin close-up :

ATX 24pin Close-up while motherboard is plugged in :

Total View ATX24 pin :

TOTAL overview mobo + atx connectors , alu plate :

[billygoat333]

simply awesome cable management.

[Chiller]

lol, that is the goal i'm going for, i see others users with a SR-2 and theyre cpu power connectors, and i didn't whant that

[x88x]

Beautiful cable work there.

[SeriallKiller]

hey can you send the link from this??

thanks

greez from Germany/Bavaria