Need help with LCD displays....

[fuz]

Hi everyone.
I have couple LCD displays and
i was going to connect them to my pc but i cannot find
any information about them....

I have 3 LCD's and here's some info about them...

1. Display: is made by SEIKO, it's 4*40 and it
has HD44780A00 chip on it.
It haves 16 pin connection (+ 2 pins for
backlight i think)
Picture:
=> http://public.fotki.com/fuzaa/lcds/dscf0234.html

2. Display: is made by Samsung and it has 3 SEC C814A KS0084
chips on it, and one chip says UG-24B04-GNBR9-R
It haves 10 pin connection + 2 pin for backlight.
Picture:
=> http://public.fotki.com/fuzaa/lcds/dscf0233.html

3. Display: is allmost same looking as Samsung's LCD
It has one LC7942N chip and 3 LC7941N chips on it.
It haves 12 pin connection and also haves backlight pins.
Picture:
=> http://public.fotki.com/fuzaa/lcds/dscf0235.html

I'd be very happy if someone could help me with this project or knows where i could find some technical information, wiring diagrams or pinouts etc. etc.
Please help the poor =D
Here's pictures of all my LCD displays.
=> http://public.fotki.com/fuzaa/lcds/

[Zuke]

EarthLCD.com

Email the dude, and he'll give you all the info you'd ever want on them, as well as the prices for controller boards or any touchscreen overlays you may want.

[crazybillybob]

The Seiko Display can be ran off your Parralell port, or you can pick up a parr to serial/usb adapter for it for about $35us

like here:www.matrixorbital.com
here:www.kronosrobotics.com
here:www.hvwtech.com

Or build your own:www.madhacker.org
Or go to and pick from using it Via the Parr port or make a usb adapter. www.hackaday.com

Good Luck,
Crazybillybob