Causality

[pheenix]

I decided to name this build in honor of the relationship between cause & effect. The cause being my desire to begin my first build, and the effect of course, will be the completed build. It will be a dual system, liquid cooled build.

Due to financial constraints, I'm doing this build a small bit at a time for the time being. Right now, I just have most of the outer frame built and a couple of panels drawn up.

For cost constraints, the panels will be made from black acetal. I ordered a small swatch of dragon plate veneer to see how well it will adhere to another chunck of acetal that I have laying around. This will give me an idea of how well the veneer will adhere to the acetal panels.

The intended end result is inspired by this image I found while looking for a source of carbon fiber (prior to discovering this site)

Here is one of the side panels that will cover the most of the water cooling parts. Again, it will be fabricated out of black acetal with a carbon fiber veneer. I figure some CCFL lighting will give it a nice effect.

[x88x]

Looks interesting. ..also, is that a 5x140 rad?

[pheenix]

The rads in the picture are a 3x 120 Swiftech and a 4x 120 Koolance with shroud (which will adorn the top panel). The small power supply is so I can have my technologically disadvantaged step kids help with the build without too much risk. A switch will select either primary PSU or "priming" PSU to drive the pump.

Some of the items like the motherboard trays (will be Lian-Li) and optical drive mounts (mountain mods) will be made by a third party.

I told my wife that the case will be just over 3 feet tall (37.5") and she jokingly said "2 feet and its me" (she's just about 4'11"). So I'm going to take a little cheap shot at her in some way during the design process.

[pheenix]

Also thinking about having a dual motherboard tray fabricated for the project. Here's a quick visual. Now I just have to find someone who can do it.

Whether or not the dual motherboard tray works out, this is the basic idea of what the motherboard area might look like.

[pheenix]

Ordered the motherboard trays, and the top panel from bigbluesaw should be arriving shortly. In the mean time, I've been pre-occupied with turning inert explosive devices into storage devices

[pheenix]

Didn't really like the way the frame turned out. I'm salvaging what I can and redoing it with miter cuts.

[billygoat333]

i'm intrigued by this project, make sure to keep us posted!

[pheenix]

Originally Posted by billygoat333

i'm intrigued by this project, make sure to keep us posted!

Will do. So far, the case is going have a 1.5 inch dept reduction. 24 inches deep should be good enough.

[pheenix]

This project has been cancelled....please lock this thread

[x88x]

Aww, I'm sorry to hear it. You can lock the thread yourself with the 'thread tools' menu at the top of the page.