ok i have a new system im putting together for myself well i new Board CPU and RAM but has anyone got good info about water cooling with the new Dual Core AMD CPU
ok i have a new system im putting together for myself well i new Board CPU and RAM but has anyone got good info about water cooling with the new Dual Core AMD CPU
Mainboard: Gigabyte GA-K8NNXP-940
CPU:AMD Athlon 64 FX-55 / 1MB / 2000Mhz FSB
Memory: Corsair TWINX 1024MB PC5400
Video: PNY Quadro FX 3000
HDD: Four Maxtor 250GB And One Maxtor 120GB 7200
Monitors: Samsung 243T
any more info pm me and ill send it out
COST: to much but it was a gift..........
The X2's are still socket 939... so any waterblock which would fit the 939 series should do fine. There shouldn't be any changes between the X2's and any other 939's... so just look up some tuts and reviews and you should be set.
yeah the x2's are phisically the same as any other a64 chip, only the powerconsumption is a bit different.
ok thats sounds cool since i know that the X2 it Dual core and the block i have has a copper single core i didnt know
Mainboard: Gigabyte GA-K8NNXP-940
CPU:AMD Athlon 64 FX-55 / 1MB / 2000Mhz FSB
Memory: Corsair TWINX 1024MB PC5400
Video: PNY Quadro FX 3000
HDD: Four Maxtor 250GB And One Maxtor 120GB 7200
Monitors: Samsung 243T
any more info pm me and ill send it out
COST: to much but it was a gift..........
Most of the heat generated will still be in the centre of the chip. The dual core's are side by side in the middle of the chip... as such...
http://www.overclockers.com.au/pic.p...eldpackage.jpg
For pentium D's anyway... i'd assume the X2's have relatively the same layout.