Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Making a remote start for your PC.

  1. #1
    Goobe danthegeek's Avatar
    Join Date
    Sep 2006
    Location
    Maryland, U.S.
    Posts
    592

    Default Making a remote start for your PC.

    Materials:
    -Battery operated Door Bell
    -5 volt relay
    -Few bits of thin gauge wire.
    -Soldering iron and solder


    First thing you need to know is the type of doorbell you will be getting. The one i used is made by "Chime Design," model number WD-1120.


    (Remote left : Receiver right)
    The reason I chose this one is, the chime/receiver runs off of 3 "C" batteries which is 4.5volts. This is important that you get one that runs on a similar voltage because you will be wiring it to a 5 volt line. You can use a door bell that runs on lower or higher voltages but then you will have to get a resistor or capacitor. You may also want to find one with a single chime so your pc doesn't turn on and off repeatedly. Mine uses a "2-tone" chime and seems to work fine.

    The remote is small and runs off of a single lithium watch style battery. I didn't modify this in anyway considering the battery should last quite a long time. If you want to run this in a wireless keyboard or something like that, all you need is a constant 3Volt source.

    I also picked up a 5V relay from radio shack; if you don't know what a relay is, they are like an electrical momentary switch. When they are receiving power the circuit is closed and when receiving no power the circuit is open.


    I made this small diagram to show how to wire the receiver and relay. Just make sure you run the positive line off of the receiver to the "purple wire" or "5V VSB" on the 20/24 pin connector on your power supply. This wire sends a constant 5 volts to your motherboard when the power supply is plugged in. You can use any ground wire (black) on your Power Supply.

    Thats it. Its a really simple cool addition to any computer.


    Click here for the Battlefield 2 L.A.N. Pc worklog.

  2. #2
    Religiously tolerant. Luke122's Avatar
    Join Date
    Jul 2006
    Location
    Canada
    Posts
    5,246

    Default Re: Making a remote start for your PC.

    Killer idea, this can also be used for an Xbox.

    \m/ d(-_-)b \m/

    R9 290X+Kraken+Corsair H90, Xeon 5649@4ghz, Asus P6T-WS Pro

  3. #3
    Goobe danthegeek's Avatar
    Join Date
    Sep 2006
    Location
    Maryland, U.S.
    Posts
    592

    Default Re: Making a remote start for your PC.

    Yup, thats part of were this comes from. The tutorial is not original by any means but I thought it wouldnt hurt to have it hear for anyone interested.

    Also, if you have any questions or additions to this please due tell.

    danthegeek


    Click here for the Battlefield 2 L.A.N. Pc worklog.

  4. #4
    Banned Eclecticos's Avatar
    Join Date
    Apr 2007
    Location
    Florida
    Posts
    3,137

    Default Re: Making a remote start for your PC.

    Now thats kewl. . Im gonna have to try that out.

  5. #5
    Modders block rendermandan's Avatar
    Join Date
    Mar 2007
    Location
    Nowhere near the beach :(
    Posts
    1,510

    Default Re: Making a remote start for your PC.

    Thats a pretty cool idea. I also might have to try this out. thanks! +Rep

  6. #6
    I didn't know I can put a custom title Dilphat's Avatar
    Join Date
    Jul 2007
    Location
    San Diego
    Posts
    268

    Default Re: Making a remote start for your PC.

    wow, that's pretty cool. I'm thinking about doing that now. lol. but by any chance is there any other way for you to show more pictures of the wiring? since im kind of a noob with modding(no worry I'll probably be under some electronic student supervision when i mod) hahah....I'm 18...darn i sound so noobish(i gotta start somewhere) thanks again.

  7. #7
    High-tech Redneck crazybillybob's Avatar
    Join Date
    Jun 2005
    Location
    Currently Homeless
    Posts
    1,028

    Default Re: Making a remote start for your PC.

    Here's a pretty good Step by Step Tut for you.
    Remote PC Start At GideonTech.com

    Hope it helps!!!


    CrazyBillyBob

  8. #8
    Goobe danthegeek's Avatar
    Join Date
    Sep 2006
    Location
    Maryland, U.S.
    Posts
    592

    Default Re: Making a remote start for your PC.

    Damn, where was that a couple of months ago,

    Thats a lot better then mine, good find.


    Click here for the Battlefield 2 L.A.N. Pc worklog.

  9. #9
    Fresh Paint rerkin88's Avatar
    Join Date
    Oct 2007
    Location
    Melbourne,Australia
    Posts
    24

    Default Re: Making a remote start for your PC.

    can you post some pictures with the wires shown more clearly? thanks

  10. #10
    Fresh Paint rerkin88's Avatar
    Join Date
    Oct 2007
    Location
    Melbourne,Australia
    Posts
    24

    Default Re: Making a remote start for your PC.

    i have a chime that runs on 2 1.5v batteries. which is 3v. would i have to get an extra resistor or capacitor for this to work or will the current be enough? thnx

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •