I bought a 2.1 Philips speakersystem.
The satellites will be integrated in the case and the subwoofer will get the same look as the case. Before I can mount the satelittes I will have to cut of the feet and cover up the steel fronts with something more suitable for my black case.
mark the acrylic before cutting it.
Cut out the circles
They almost fit, still need a bit of sanding.
Because of a thunderstorm I had to quit working on the polyester sidepanels. I was bored and used some tape to put some parts onto the frame.
It far from finished, but just to give you guys an idea of what it will look like.
Please keep in mind that the case will be painted and that I will add so many details, like windows and decoration.
I glued in the airducts in the left side panel. Used some heavy materials to press the polyester sheet down.
Used some bondo to fill up the small gap between the airducts and the sidepanel.
The airducts themself also need some bondo and I will have to sand them several times.
I also need another mold, a mold for yet another airduct. It will look like in this sketch.
The fan will be mounted on the right side and I already made the acrylic to hold the fans. These are two AC Ryan 90mm. fans.
The duct will be placed over here (one on the left side and one on the right side of the case)
and the mold is almost finished. Only need to paint, sand, paint, sand and paint it before I can use it.