in the last photo it almost looks like a shark from a side view
looks great man
in the last photo it almost looks like a shark from a side view
looks great man
LOUD AND PROUD !
ha haaa
carry on lad !
LOUD AND PROUD !
one of this rails will hold the rip that covers the dvddrv. the construction itself would be 2 heavy for the drv tray i think.
will be mounted somewhere here!
some bending work
to hold the drv.
no swinging plz!
more drv support
some alu-covers for the wooden parts.
the tiny holes are for some smd status leds that will be mounted in the spine.
tiny plexi covers for tiny holes.
cables are running through a canal on the backside. will be filled with some putty.
what can i say....
a nother great update
LOUD AND PROUD !
i think i really need some light arround my slots
some smd leds will be mounted on the backside.
the QRS of the sidepanels will be similar to the one on the front and top. we´ll have just diffrent dimensions . 8mm bars and much stronger splints.
the bars mill be mounted on the mdf parts
the mdf is part of the topsection.
just some bondo to make it look a more smoother.
I cant wait to see the end result mate i been viewing this day by day lol
Great work so far man
i think theese screws will give a nice clean look
cover for the mobo tray is mounted
the electronicstray needs an own io-bracket. subd plug for the remote controll, big plug for auxpsu , small one for the fan remote controll
mounted to the tray ...
just before somebody aks ...no, the soldering wont stay that bad
made a hole for the fan in the front panel
The holes on the inside get an extra plexi layer. the plexirings will be lighted up so every hole has it´s own corona. colours can change from red to white (later ... )
some more bending
this part will be mounted under the top of the case. nobody will ever see this but .. i give a f...
cause it prevents my fingers from getting in the fans. i can tell you that really hurts!
to light up the case just in pure white i´ll hide a lots of leds behind this plexibar. 20-30 ( only 900mcd. there´s no space for normal leds so i use smd leds ( plcc2) )
cya tomorrow ( hopefully )
Dude thats comming along wuite well
today we start with the remote control. i used a part from an old front.
i dont want so many plugs, switches or whatever on the case itself so everything will be controlled from my desk.
i did some quick rendering with sketchup for the controlpanel. the 2 gray buttons on the left side will look like this in the final version.
the caps gonna cover some buttons. i am not shure wich shape they will have.
the big wheel in the center drives 2 potentiometers, one for the 230v fans , the other is for visualising the movement of poti #1.
it creates a signal for this little circuit
in this picture it´s running in dotmode, the final version will run the barmode but that needs some extra cooling i was quite 2 lazy for.
cutted and done for today ...