Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Female Molex Pin Removal with out the tool.

  1. #11
    Overclocked
    Join Date
    Apr 2005
    Location
    Canada
    Posts
    223

    Default Re: Female Molex Pin Removal with out the tool.

    I used an old telescoping antena and tore it apart so i had all teh sizes out. then I slightly squished the ends a bit so when i put them in and twist and then pull on the wire they pop out perfectly. Thought of that idea way back before I had tools. Thats for the molexes.

    As for the atx used staples and then got tools but now i just repin them all since most likely i would be changing the colour of the connector anyways and resizing every wire.
    Mesh makes the world go around!!!!

  2. #12
    Anodized
    Join Date
    May 2005
    Location
    State of Confusion
    Posts
    53

    Default Re: Female Molex Pin Removal with out the tool.

    Quote Originally Posted by Whisp
    I used an old telescoping antena and tore it apart so i had all teh sizes out. then I slightly squished the ends a bit so when i put them in and twist and then pull on the wire they pop out perfectly. Thought of that idea way back before I had tools. Thats for the molexes.
    Thanx. tried it and it works good.

  3. #13
    Overclocked
    Join Date
    Apr 2005
    Location
    Canada
    Posts
    223

    Default Re: Female Molex Pin Removal with out the tool.

    Quote Originally Posted by lorddarkwolf
    Thanx. tried it and it works good.

    Glad it worked out for you.
    Mesh makes the world go around!!!!

  4. #14
    Fresh Paint
    Join Date
    Jun 2005
    Posts
    1

    Default Re: Female Molex Pin Removal with out the tool.

    i wish i was smart

  5. #15
    Water Cooled Xato's Avatar
    Join Date
    Mar 2005
    Location
    Sydney
    Posts
    611

    Default Re: Female Molex Pin Removal with out the tool.

    So do lots of other people i bet.

  6. #16

    Default Re: Female Molex Pin Removal with out the tool.

    Quote Originally Posted by Rachel
    I used a sewing pin and a bent staple. Kinda like this...

    I tryed two staples but the pin worked alot easier.
    Yeah!And I made this MOLEX glow like <<This >> :p
    Now all my MOLEXs glow!

Similar Threads

  1. Removing Molex Plugs Tutorial
    By gaz_the_chav in forum Electronics
    Replies: 9
    Last Post: 11-18-2006, 11:42 AM
  2. molex pins & Crimpers - Male & Female
    By bpm990d in forum Motherboards, Processors, & Power Supplies
    Replies: 8
    Last Post: 11-27-2005, 10:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •