Alienware Aurora ALX-XL is sponsored by:
Update!!!
The end is almost in sight. Recent weeks i've done a lot on the Alienware Aurora R4
Because the sleeving didnt go easy with the large connector I used extensions. It is certainly not MDPC sleeve, but it's not too bad
Lower GPU power connected
And another
One more
And the last one
Some straightening and pulling
Looks nice
24 pins also some shapening
You've probably saw some pictures pass by with the the tubes, but here everything is connected. This time with 12/10mm tubing
Finally I found them with the perfect size (thanks E22 Nate). Only thing to do is to file a little edge off the tubes just like the crystal links.
Was a lot of work, but here one pic of the other side finished lol
Time to fill her up and leak testing. Optical drive removed and fill the bayres.
After some noise...it became quit
And then it was dark ...
Lights on please!!!
Oww almost forgot, the midplate: I've got the whole plate illuminated using a green ccfl bar for one half.
And the other half (left) I've used a glowpad. The PSU cage would otherwise cause a dark spot ... not now
And power on!!!. Because the side panel is off, 3 white LEDs are shining at the top, which shows the internal
Leds off
Default color is green, but all original color options are possible
Front is looking very nice
And lights back on. Some pictures with daylight and the panels installed
Still some minor work to be done, such as the Nvidia GPU sticker on the cover, acrylic window and so on. Next time Cheers!