After a tear jerking finale to the current Doctor Who series, it's only right I give you a little update to progress. I knew the window frames were going to be fiddly but I hadn't really expected the top sign boxes to take over a week to finish.
These are the little boxes that are just above the door, which hold the illuminated signs. I made 6 small L shaped end pieces (there are 6, but only 5 in the photo) and then created long strips with a small notch cut in each end. This would allow the end pieces to sit flush into them.
Click the images to enlarge
Once the glue had dried I insterted a square piece into each end as it was incredibly weak. These pieces prevent the box from twisting itself out of shape. I also inserted some small pieces of square dowel into the gaps to complete the box. These sit flush with the vertical posts. As the signs are illuminated, I had to make some holes just above the doors of the TARDIS for the light to shine through.
There will need to be a bit more filler when the sign boxes are glued into place. I can't glue them yet as the signs themselves have to be "framed" in place, so need to be inserted from behind. I've still had no major luck with making the signs so experiments with paint, glue, tippex, stencils, and stickers continue.
Work for next time includes:
The front "phone" door
Get the motherboard mount in place
Fix a gap between the roof and the main box.
And hopefully I'll have some luck with my illuminated signs.