Pci Fan

[Snowman]

Hey guys and gals I went and picked up the itx carputer from the house that is now a storage place pretty much this weekend and remembered that I need a slimline fan to put on the heatsink. If someone had a fan something like this

that I could take the bracket off of and attach it to the heat sink and would be so kind to let me know that would be awesome.

[farlo]

not sure if this helps, but i have the heatsink for an old pny 8800gts, has a fan of that type.

like this: http://www.pcstats.com/ArticleImages/200702/8800GTS.jpg

[Aldersan]

im pretty sure he means fans that are designed for a standalone psu slot, not off of a graphics cards

[Snowman]

Yeah I need something slimline that I can lay on top of the heatsink because this is in a mini itx case and there is not enough air movement over the heat sink and not enough clearance for a regular fan.

[xr4man]

when i was building my car pc, i ended up getting a nice low profile all copper north bridge heatsink and then attaching a 40mm x 15mm fan to it.

i was running a mini-itx board with a dual core atom processor.

now that i think about it, that was actually on the northbridge of the intel board. but i also used a northbridge heatsink on my evil red htpc for the e-350 processor.

[SXRguyinMA]

Gelid 1u CPU cooler

http://www.xoxide.com/gelid-slimsile...cpucooler.html

[SXRguyinMA]

Here's more from the egg

http://www.newegg.com/Product/Produc...rder=BESTMATCH

[Snowman]

Here is the board I am working with

http://images17.newegg.com/is/image/...630-TS?$S300W$

Though a bit more than a fan this may be a viable solution

http://www.amazon.com/Antec-Mini-ITX.../dp/B00292BV8C

[diluzio91]

i have that exact model if you're okay with it having the molex connector snipped off.

[Snowman]

i have that exact model if you're okay with it having the molex connector snipped off.

the fan I have listed?? Can the pci plate be taken off?