-O═HotRod═o-

[TheMainMan]

Great idea for the fan as a wheel. Looks good!

[ArgOs]

thank you very much to all

Great idea for the fan as a wheel. Looks good!

Wait a little more and you will see.

[AmEv]

I see "spinners" coming in the nearererer future.....

[ArgOs]

Humm... It's a good idea, I'll think ;D

[farlo]

killer stuff so far.

[ArgOs]

Continued killing stuff., Inside the fender, I placed a plate for better viewing and will pass putty for details..

Then I paint with primer.

I pass sandpaper the to the other parts to pass after priming.

The front and the air intake.

I reinforced the top, I will pass the sandpaper and putty, then put the air intake and putty.

I cut to the air intake.

Then I reinforced the bottom and I made ​​some cuts.

And finally I started to paint some parts.

[ArgOs]

After the primer was sanded the surface to match it.

Place a plate on her side, and you will see in the future.

Then everything was painted shiny black.

the hinge and silver color foot.

Pictures of the progress of the painting.

I cut the side to match the inclination of the case.

Thanks to all for the comments.

[x88x]

Nice progress. Keep it up.

[ArgOs]

Thank you x88x
The side ready.

I use a part that I cut the case, to create the side support.

I will attach the hinge to the Side. As you will see there is much dust in my garage.

I put a rubber at the foot, between the steel sheet and foot, other rubber will go under.

I created the mesh brackets

I painted pop rivets.

[x88x]

Nice! I like that door. Very unique.