This... problem... has been taken care of, but not without considerable effort.Originally Posted by TheGreatSatan
Let's hope it stays that way.
This... problem... has been taken care of, but not without considerable effort.Originally Posted by TheGreatSatan
Let's hope it stays that way.
Thank you.
I decided to put all the components in the case. Partially because I have so much stuff in my work area and I'm running out of clean space and becauseI've been doing so much more on other projects and this one needs to be finished. I tried putting the motherboard in, but unfortunately it wouldn't fit; the bolt on one of the legs was too long and in the way.
So I trimmed it.
Then screwed it back into the bottom.
Before I put the motherboard in I had to take out the HD, because otherwise it wouldn't fit. But after I got the motherboard in, the HD wouldn't fit because the heatsink was in the way.
Now that I got that in, here's a question. Do you think this is a bad setup? I really don't have the room too do anything about it, but does it seem like the PSU and the heatsink are going to fight for air?
Next comes the cables and lights
The 12V was easy to reroute.
All other cables are in.
Now to the lights.The first I put along the bottom.
But the second won't fit where I want it to go, so I won't be using it.
Everything is in.
If my mom doesn't want all that light she'll be able to turn it off in the back. Also there's 6 USB ports and Onboard Video.
WH1T3 0U7
*******************************
Modified Thermaltake View 37
Intel 9900K, MSI Z390A, 128GB (32GB x4) GSkill Royal 3200MHz, RTX 3080 Vision, EVGA Nu Audio, 1TB Silicon Power SSD, EVGA 1300G2, ID cooling 360mm AiO, LG 3440 x 1440
No matter how careful we are, there is always another obstacle that we will have to overcome.
I really love the case! Hope your mom says the same! Great job, now all we need is some night-time pics. Lights, anyone?
Optimist - The glass is half full
Pessimist - The glass is half empty
Engineer - The glass is twice as big
Me - There is water in a glass, deal with it
Yeah, it seems like setbacks is the big thing for everyone right now. It looks like you are pushing along though and finding a way to make things work. Looks good too.
I shave off the end of the light.
And it fits.
I also started painting the converter box.
WH1T3 0U7
*******************************
Modified Thermaltake View 37
Intel 9900K, MSI Z390A, 128GB (32GB x4) GSkill Royal 3200MHz, RTX 3080 Vision, EVGA Nu Audio, 1TB Silicon Power SSD, EVGA 1300G2, ID cooling 360mm AiO, LG 3440 x 1440
I painted the wiring on the bottom to camoflage it.
Then I dropped in the plexi glass.
AND YOU HAVE BEEN CLOWNED.
Time for the lights!
Here's in the dark with the EL Wire only.
And then with the two cathodes.
WH1T3 0U7
*******************************
Modified Thermaltake View 37
Intel 9900K, MSI Z390A, 128GB (32GB x4) GSkill Royal 3200MHz, RTX 3080 Vision, EVGA Nu Audio, 1TB Silicon Power SSD, EVGA 1300G2, ID cooling 360mm AiO, LG 3440 x 1440
The dog could be better, but its acceptable. Great job on the project!!! Its great!!!
I agree about the dog. It's meant to be a balloon dog, but it seems to be made from straight edges rather than curves. Particularly on the ear.Originally Posted by maximan1
I like the blood red inside though, really bright!
Yea the dog... mmm its not a bolloon but it still is a dog and a fine dog to me.. I realy realy realy like the lil feels they look REALY coolOriginally Posted by xmastree
and that makes your mod perfuce (my mom would go crazy if she would have that pc but I hope yours like it