Water cooling an Xbox 360

[Panda]

I just finished fixing an RROD Xbox 360 (floated the solder) and now plan to water cool it. I've been looking at the XSPC Waterblock http://www.tilatech.com/products/XSP...ter-Block.html just want some ideas on an internal radiator and pump small enough to fit in the case. I plan on having this all internal and am willing to hack up the inside if necessary.

[NightrainSrt4]

You should be able to squeeze a DDC in there, and if you can find one of those 2x40mm radiators, that could go where the regular fans are.

Edit:
Here's a 360 watercooled with DDC and the 2x40mm radiator.
Edit: 2x40mm is made by Magicool.

They also tried a 120mm rad as well. Not too much info though, and I'm not sure who carries that 2x40mm anymore.

[slaveofconvention]

Slightly off topic, but anyone know what temperature gauge he used?

[NightrainSrt4]

Looks like this one from Aquatuning

Or

This one is almost identical, also from Aquatuning

Edit: Or this. I think they are actually all the same display but a different config for the tubing ( different size / inline / etc ).

[Panda]

Thanks guys, I plan on taking my FREE Xbox 360 I got from a friend to work tomorrow (yes i fixed it) and putting in some red led's (I find it humorous) in the power button.

Plans:

side window
liquid cool
red leds
custom paint job

will post more in Works in progress section...... stay tuned.