-
06-07-2010, 06:25 AM
#211
Re: Project: Call Of Duty Modern Warfare 2 !!!UPDATE!!! 26 April 2010
Thanks!!! I am hoping for an actual work update this week. I have most of the frame parts painted, just need to sand down the drive cage and rear panel then paint.
-
06-12-2010, 10:46 AM
#212
Re: Project: Call Of Duty Modern Warfare 2 !!!UPDATE!!! 26 April 2010
Well I have suffered a minor setback. I guess the "self etching" primer I used to prime the sanded parts was bad because I slightly bumped one of the finished frame rails this morning with the handle of some scissors and a 1" flake of clear, paint and primer just popped off. I could touch the rest of the paint around the flake and it would just lift up from the metal. I really wish I had a working sandblaster, it would make things so much easier.
The surface was roughed with 220 grit, cleaned with wax and grease remover (automotive surface prep) and then shot with 3m self etching primer.(bought from walmart). So this next time around I am not going to play around. I just called the automotive paint store and put an order in for a quart of epoxy sealer primer, quart of ppg black base and quart of ppg clear along with all the supporting reducers.
I have a wedding to photograph in about 3 hours and they close for the day before its over so I will not be able to pick it up until Monday. I think I am also going to order of qt of Grey and White also and use it instead of the createx airbrush paint for the camo paint job.
On a side note I am 75% finished with my Arduino Controlled PC Water Cooling Information Center, and will soon be starting on the water pump cover that will house the LCD.
-
01-02-2011, 06:04 PM
#213
Fresh Paint
Re: Project: Call Of Duty Modern Warfare 2 !!!UPDATE!!! 26 April 2010
I saw your post on measuring the flow. I'm not sure if you have seen this module, but it looks like what you need. Good luck with your project.
http://www.seeedstudio.com/depot/g12...?cPath=144_151
Bobby
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules