DnA

[p0Pe]

and your gonna get it! not as cool as i hoped though.. the pics dosnt do the loop justice since the water in the res looks AAAWSOME with the light in dark!!!

this is the res with the clear water up to about half. i messed filling the loop and dropped some fluid so i didnt have enough to fill it gotta order another L :/ but its only 30$ soooo...

and the pump bay thingie

with led light

black & white!

not the sharpest pics.. but it will do

i personally like this one

and this one

erm.. and this one lol

okay... i like most of them:

the gfx

and the res´s again. its hard to get a prober shot with this light source -.-

proper shot of the whole loop

the pump controllers:

and another few eye candy shots

a shame that tygon have to put numbers all over their tubes it totally destroys the last touch! curse them

the awsomemememe pumps! i turned them down to lowest speed and they are decent quiet... (everyone who has a ddc pump knows the noise they can make at full blow)

so.. there you had it now all thats left to do is fixing the radiator fan cover... i have bend it and such but its just hanging on the side for now. need to paint it, and maybe put some light under the "DnA" logo.

enjoy, and have a nice weekend;P

[p0Pe]

Those pics look amazing. I wish I could see that in real life because it's gotta look twice as good. +rep

yeah, it really does but most mods do and thx alot!

Hey pOPe! Just got a chance to check out your puter and awesome job on the wc'ing and cable management! The whole thing looks fantastic! Props & of course +rep

thx for reading and the cable manegement was one of the things i just wanted to do perfect! i cant stand comps with cables everywhere amazing what you can do with a little patience

well... as i turned off the pc yesterday, the last water in the hdd res just went down to the pump, so now there is excactly not enough fluid to make the thing run -.- .. so i have to order another L for like.. only fill up the res lol...

i might order someting else while im at it just got my hands on some cash i didnt expected

[p0Pe]

this little 24" sucker
http://www.benq.com/products/LCD/?product=1313

[p0Pe]

okay! a small update.

the reason that this mod has been on stand by for a while was beacuse the reservoirs leaked sadly...
it went so bad that fluid was going in between the plastik and the metal on the top, so had to find new reservoirs... only problem, they had to be 60mm in diamiter to fit in. and such reservoirs is hard to find
asked xspc if they could make costum reservoirs but sadly no.

so only thing to do:
1: make them myself.
2: fizzle around with some premade

i choose nr. 2

took 2 of the 150 ml xspc reservoirs and since they were 70mm in diamiter i had to cut away some. but only so they just fitted into the top whole:

so i went ahead and killed the little buggers!

dismantle the old ones i loved them but cant use something that leaks -.- i thought about buyin a pair of new ones, but i just dont think that they can manage the preasure and passive temps, which i want to play a bit with :/

and here to show the leaky part:

and how it fitted (with a little violence with the dremel)

one down another one to go

im probertly gonna end up doing a litle cover plater to make a smoother "edge" between the res and the case top

with modyfied top (originally to wide)

light from the blue bouble light (think this is gonna look cool in the dark)

note that in theese pics fluid already has been filled in

so how its gonna look compared to the old. a big bigger and not transparrent but... ill survive.
and its alu i know, but i hope to be alright with the amount of anti corrosion fluid thats in lol

i dont know when ill have the time to do the other one, but for now:

marry christmas and happy new year!

[p0Pe]

So.. a small update.
Its been a while but ive had a thing or two between my hands (or on my feets should i say…)
Rules are made to be broken lol

That’s me, with the baby size ski´s

For some reason this route was closed and called “the murderer” we had to find out why… took us an hour to get to the bottom of the valley xD on normal routes we could run that trip in 5 min.

Well.. on to the mod!

As you can see I already installed one of the new reservoirs. And I did not have the time to start on the other one since I knew it was going to be a b#tch to install

Had to take the back plate of again. What a mess:/

Note the bracket I used to keep the wires in the hole made for them to slip through xD the little whole all the sata cables are going through is the one that’s barely visible on the other side.

This is the space I have to work with :/

Now this little thing is going to be hard to get out xD

“working it”

And as usual the watergods didn’t thought nice of me, so on of my fittings went mental.. but I don’t belive in gods so on with it

And a little neat feature I made on the raddy fan cover

And a very very bad pic of how it turned out. I have a few plans on how to make a smooth erm… “melting”? between the res´s and the top. But that’s gonna be later

I have talked with one of my friends about getting some nicer foto´s of the whole case, (he´s a camera geek) so I hope to get some better pics up soon

Don’t know how much I will be able to work on the case the next amount of time though… my car just broke and at the same time some sh#t f#ckers decided to break the rear and front window and steal my sound system but life goes on

Ill cu!
Comments and stuff are as always greatly appreciated!

-p0Pe

[p0Pe]

a little teaser on the sponsor plate:

this is not the final version though

[p0Pe]

thx man

a update, sort of... got tired of the old desk and got myself one from work! you dont belive what they threw out :S

old desk:

and 5 min after then WRUAM! and the nuclear vacum cleaner had it torn apart!

starting to asemble the new table. look at the size of that thing :O

how high it goes,

how low,

and with the pc in place! damn there is a lot of room on this sucker xDDD

that was actually what i had to show lol...

sleep tight

[p0Pe]

I tryid to take a few decent pics of the pc on the desk. On this on it actually looks quite standard except from the side window and the top res´s

And how it looks with the side panel off. I didn’t like the looks of the psu compartment, neither did I like the harddrive compartment so I decided to see what I could do about it

This was how it looked to start with

And after I worked a little with a black piece of acrylic

And gonna make another one for the hdd compartment… just have to dremel it into shape first
Like this:

Sooo… I wanted more light in the case as the single led strip wasn’t enough
Couldn’t find space in the case itself though the strips would either be to visible or to invisible!... so I mounted them on the side panel with a 3 pin fan connector so when I have to take the side panel off, I don’t have to cut it all up

Now I just have to get the wire that goes the remote control and find channel 2 on that one ó_ò
Luckily I remembered wich one it was;P sort of

A soldering station really eases things up lol!

Weight -.-

And some bad night shots I want to have some really god pictures taken soooo baaad! You cant see jack of the light on these ones:/

Okay.. this one sort of does it

And some blurry overall pics

Enjoy comments and questions is as always welcome

[p0Pe]

a little teaser. couldnt resist!

and tommorow your in for another suprice

[p0Pe]

lady´s and gentlemens

a few shots since i didnt have time to go trough 150 pics @ 20mb. but better might come

i give to you

DnA

ill let the pics speak

for better quality click the pics

hope you like it more will come and then ill put this in the chest of finished mods!

best regards /0/

-p0Pe