As I have had a TON of time to work on this mod, I will have a pictorial update for you in the next day or two.
I have disassembled my primary rig (the one that housed all of my hardware that is going into Deuce) and have been installing and removing all of it in an effort to better visualize and route all of the cabling.
Well, in the coming days, there will be some good and exciting pics that I think you will like, as well as some serious movement.
To give a brief synopsis,
1) My plan for the pumps was not going to work. I mis judged the width of the motherboard and where the backs of the video cards were going to be.... but trials can bring inspiration when routed properly, and I came up with a bitchen solution for the pumps! I think you will like!
2) Chemical "WeldOn" is drying on the last joint of my reservoir brackets! I took one of the completed units and the one prototype that I did many weeks back, and placed them in the 5.25" bay area to see how they would work... and I am happy! I eyeballed those dimensions perfectly!!!
3) SLI bracket on the video cards is going to be a bit of a pain in the tookus.... since the cards each have their own full cover, I have to find a way to route the SLI bridge through the flamed acrylic *without* messing up the flow. This only impacts the top card, since the SLI bridge must cut across the flames to make it to the bottom card. I think I have an idea to minimize the flame impact.... we'll see.
4) I ordered fans for hte video cards, and unfortunately I recieved the wrong type. I am awaiting the replacement correct white LED fans.
5) In all of the hoopla of placing my case, I had the epiphany that, "Oh crap! I dont have room for an optical drive!" DOH!!! But I found an excellent item that will work the solution, an eSATA/USB chassis that will hold the CD/DVD drive. I have to check out my SATA ports on the machine, and if that wont work, then I will have to use it as USB. Fingers crossed....
more to come... but that is about a summary of what all is going on!!!