Page 7 of 9 FirstFirst ... 23456789 LastLast
Results 61 to 70 of 90

Thread: The TBCS Overclocking Thread

  1. #61
    Practice random acts of generosity Omega's Avatar
    Join Date
    Feb 2006
    Location
    A house
    Posts
    4,577

    Default Re: The TBCS Overclocking Thread

    Alright. Specs:

    Intel C2D E4500 Allendale "2.2GHz" @ 2409MHz (219*11)
    MSI Neo5 Intel i945P, American Megatrends BIOS
    2gb PNY Optima RAM, Dual Channel, DDR2-5300 (333MHz)
    eVGA e-GeForce 7800GT PCI-e x16

    Screenshot:



    Temps:
    19c @ fan (idle)
    29c @ cores (idle)
    35c @ fan (load)
    45c @ cores (load)

    Air Cooling:
    One 80mm intake fan
    Stock Intel C2D Cooler
    120mm rear Exhaust Fan
    80mm top Exhaust Fan
    PSU fans (two 80mms)

    All fans are at their highest CFM settings (sorry, I don't have a cfm meter to tell you)



    i5-3570k @ 4.40GHz // R9 380X @ 1020MHz // 2x Samsung 850 EVO SSDs // 2x 2TB HDDs
    Fractal Design Define R2 XL "Monolith"


  2. #62
    Hack the Planet! alphastryk's Avatar
    Join Date
    Jun 2007
    Location
    Atlanta, GA, USA
    Posts
    180

    Default Re: The TBCS Overclocking Thread

    Processor: Intel Pentium 4 (Northwood)
    Processor Speed (Stock): 2.8GHz
    Processors Speed (OC): 3087MHz
    Multiplier: 21
    Voltage: 1.5V
    Idle Temp: 38C
    (CPU-BurnIn) Load Temp:
    RAM Speed: DDR 400 (PC 3200)
    Timings: 2.5-3-3-6







    el cheapo $12 air cooler, don't remember if there was a name brand

  3. #63
    ATX Mental Case khalie's Avatar
    Join Date
    Jul 2005
    Location
    Poland
    Posts
    117

    Default Re: The TBCS Overclocking Thread

    Here is mine e4300 Allendale
    photo

  4. #64
    LOLWUT?! Scotty's Avatar
    Join Date
    Jun 2006
    Location
    P'boro, England
    Posts
    1,769

    Default Re: The TBCS Overclocking Thread

    Ill get round to updating tomorrow guys, some nice OCs

  5. #65
    . Spawn-Inc's Avatar
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    4,145

    Default Re: The TBCS Overclocking Thread

    never saw this thread...

    CPU Name: Intel Celeron 420 1.60GHz
    Clock Speed: 3.11GHz
    CPU Volts: 1.28v Idle and 1.272 Load
    Idle Temps: 43C
    Load Temps: 58C
    Cooling Method (Air, Water, TEC, Phase, LN2): after market Air
    Items Lapped: CPU, CPU Heatsink, GPU heatsink, custom made Voltage Regulator heatsink on video card, Ramsinks for Inducers.
    Arctic Silver 5 Applied to the Following: CPU, GPU, Ramsinks for inducers,custom made Voltage Regulator heatsink on video card, all stock heatsinks for motherboard.
    Fans: 10 total
    1x 250mm Side
    1x 120mm Front
    1x 80mm Rear
    1x 80mm PSU back
    1x 135mm PSU bottom
    1x 40mm Voltage Regulaor and Inducer
    1x 40mm Northbridge
    1x 80mm Video Card
    1x 82mm Video Card
    1x 92mm CPU

    Heatsink/Waterblock Model: CPU = Arctic Cooling Freezer 7 Pro, GPU = Arctic Cooling Accelero S2
    Motherboard: eVGA 122-CK-NF68 680i A1
    RAM (Amount and Brand): 4GB 4x1GB stick Samsung
    RAM Speed (Can be done through CPUz): 729MHz
    RAM Timings: 5-7-7-17-22-2T
    RAM Voltage: 1.9v
    Operating System: MicroSoft Window XP Home 32 Bit
    3dMark06 Score = 6211
    AquaMark3D Score = 110,641

    here is my super screen shot
    http://img212.imageshack.us/img212/7608/masterscreenshotry6.th.jpg
    Here is my 3dmark score link
    http://service.futuremark.com/compare?3dm06=4017807
    Here is my AquaMark screen shot
    http://img183.imageshack.us/img183/8796/aquamark3110641nm2.th.jpg

    UPDATE: gpu-z screen shot for the newer clocks.
    [img=http://img259.imageshack.us/img259/1586/8951000os0.th.jpg]
    CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
    GPU: 9800GTX /GTX780 hydrocopper
    Ram: Samsung 4GB /gskill 16gb DDR3 1600
    Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
    PSU: Enermax Galaxy 850Watt /EVGA 850 G2
    HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
    LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
    Sound: Logtiech Z 5500
    CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v

  6. #66
    LOLWUT?! Scotty's Avatar
    Join Date
    Jun 2006
    Location
    P'boro, England
    Posts
    1,769

    Default Re: The TBCS Overclocking Thread

    I really should get round to updating this =\

  7. #67
    . Spawn-Inc's Avatar
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    4,145

    Default Re: The TBCS Overclocking Thread

    Sweet fancy moses! i got my video card ram running at 8800GTX 768MB Superclocked speeds!!!!!!!!!

    screenie



    i did it by mistake too!, i just finished finding out that my dad's P4 3.0GHz @ 3.6GHz was worse than my celeron @ 3.11GHz so i set the card back to stock. well my gaming clocks wouldn't run stable so i made 1 pass on the vcore and vmem and i never bothered to check the voltages. i checked them 20 minutes ago and the vmem is running at 2.20v! sure enough i hit 1000MHz on ati tool for an effective 2000Mhz.

    i am going to try to get my vcore up to 1.7 and try to score better in 3dmark to reclaim my third position spot as someone got 6101...

    EDIT: i hit 6211!!!!!!!!!!!!!!!! i'm soooo happy!

    vcore 1.72, vmem 2.20 clocks 895/2000/2020 awesome stuff!

    dammit i forgot to run aquamark3d...
    CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
    GPU: 9800GTX /GTX780 hydrocopper
    Ram: Samsung 4GB /gskill 16gb DDR3 1600
    Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
    PSU: Enermax Galaxy 850Watt /EVGA 850 G2
    HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
    LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
    Sound: Logtiech Z 5500
    CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v

  8. #68
    Keepin' it Metal .Maleficus.'s Avatar
    Join Date
    Jun 2006
    Location
    The Dairy State...
    Posts
    3,347

    Default Re: The TBCS Overclocking Thread

    Jesus Jackson! That is one helleva overclock! I've been thinking about volt modding my 8800GT, but where are you finding voltages? Are you just using a voltmeter?

    Yikes, SLI that and you'd compete with 8800's.
    RIP Bucko

  9. #69
    Fox Furry crenn's Avatar
    Join Date
    Apr 2005
    Location
    In the shadows behind you
    Posts
    4,067

    Default Re: The TBCS Overclocking Thread

    Quote Originally Posted by Spawn-Inc View Post
    i did it by mistake too!, i just finished finding out that my dad's P4 3.0GHz @ 3.6GHz was worse than my celeron @ 3.11GHz so i set the card back to stock. well my gaming clocks wouldn't run stable so i made 1 pass on the vcore and vmem and i never bothered to check the voltages. i checked them 20 minutes ago and the vmem is running at 2.20v! sure enough i hit 1000MHz on ati tool for an effective 2000Mhz.

    i am going to try to get my vcore up to 1.7 and try to score better in 3dmark to reclaim my third position spot as someone got 6101...

    EDIT: i hit 6211!!!!!!!!!!!!!!!! i'm soooo happy!

    vcore 1.72, vmem 2.20 clocks 895/2000/2020 awesome stuff!

    dammit i forgot to run aquamark3d...
    HOLY S***! And you're just running this through the PCI-E slot?!
    Antec Sonata II | Pioneer DVR-212
    Good news! You can follow my website or follow me on twitter!

  10. #70
    . Spawn-Inc's Avatar
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    4,145

    Default Re: The TBCS Overclocking Thread

    Quote Originally Posted by .Maleficus. View Post
    Jesus Jackson! That is one helleva overclock! I've been thinking about volt modding my 8800GT, but where are you finding voltages? Are you just using a voltmeter?

    Yikes, SLI that and you'd compete with 8800's.
    here is the thread i started on volt modding my card and i got the info from this vrzone post. i have the same layout as the inno3d card and they tell you alll the spots you need to know and where to use the pencil mod.

    i wish i could compete with the 8800's but there gpu core is better than mine, unfortantly the the MHz don't determine performance alone. i am really curious to see if i could beat out the first place guy, on evga mod rigs, with a quad core and my 1 video card vs his sli setup.


    Quote Originally Posted by crenn View Post
    HOLY S***! And you're just running this through the PCI-E slot?!
    yuppers!, i would like to push more and try to hit 1000mhz on the core but i think i would be pushing my luck. i might try it once i have a replacement and better cooling for the card, even though i never hit 60C durning the 3dmark run.
    CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
    GPU: 9800GTX /GTX780 hydrocopper
    Ram: Samsung 4GB /gskill 16gb DDR3 1600
    Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
    PSU: Enermax Galaxy 850Watt /EVGA 850 G2
    HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
    LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
    Sound: Logtiech Z 5500
    CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •