prosser13
04-03-2007, 03:05 PM
Thought I'd post up some designs and get some advice :)
Top
http://i5.photobucket.com/albums/y189/prosser13/Designs/top.jpg
For the blowhole I'm currently going to go with something like this, designed by MNPCTech:
http://i5.photobucket.com/albums/y189/prosser13/casemod.jpg
Left side panel
http://i5.photobucket.com/albums/y189/prosser13/Designs/left.jpg
Windows dimensions and shape (as you can see its much more angular)
http://i5.photobucket.com/albums/y189/prosser13/Designs/casewindow.jpg
Right side panel
http://i5.photobucket.com/albums/y189/prosser13/Designs/right.jpg
Front Overview
http://i5.photobucket.com/albums/y189/prosser13/Designs/Front-1.jpg
Alternative design for the front (take a look at the raised fan holes here (http://www.themodnation-forums.com/viewtopic.php?t=687&postdays=0&postorder=asc&start=30) and imagine a double one of that with mesh in the raised bit)
http://i5.photobucket.com/albums/y189/prosser13/Designs/Frontraised.jpg
Back
http://i5.photobucket.com/albums/y189/prosser13/Designs/back.jpg
Mounting of back fan (crude design, blue = fan, green = spacer, red = mounting hole):
http://i5.photobucket.com/albums/y189/prosser13/Designs/backfan.jpg
Measurement of the back panel, showing why fan won't fit and giving an idea of where spacers will be:
http://i5.photobucket.com/albums/y189/prosser13/Designs/DSC01427.jpg
Colour scheme:
Outside: Metallic red
Inside: Black
Lighting: Blue (from LED strips), UV (from LED strips)
Cable sleeving: Black
More to come, this is just a basic idea - need to get the acrylic panel on the right side for the lights designed, chose a fan grill for the top which I can actually afford (the MNPCTech one is $60 + shipping to the UK, not sure I can afford it) - I'll get the designs of the LED light strips done and up soon (need a reply from D3D), same for the internal design; I'm moving the hard drive bays above the PSU, the screws in the top (2 of which are power/HDD LEDs) hold that in place.
So, thoughts please ;)
Top
http://i5.photobucket.com/albums/y189/prosser13/Designs/top.jpg
For the blowhole I'm currently going to go with something like this, designed by MNPCTech:
http://i5.photobucket.com/albums/y189/prosser13/casemod.jpg
Left side panel
http://i5.photobucket.com/albums/y189/prosser13/Designs/left.jpg
Windows dimensions and shape (as you can see its much more angular)
http://i5.photobucket.com/albums/y189/prosser13/Designs/casewindow.jpg
Right side panel
http://i5.photobucket.com/albums/y189/prosser13/Designs/right.jpg
Front Overview
http://i5.photobucket.com/albums/y189/prosser13/Designs/Front-1.jpg
Alternative design for the front (take a look at the raised fan holes here (http://www.themodnation-forums.com/viewtopic.php?t=687&postdays=0&postorder=asc&start=30) and imagine a double one of that with mesh in the raised bit)
http://i5.photobucket.com/albums/y189/prosser13/Designs/Frontraised.jpg
Back
http://i5.photobucket.com/albums/y189/prosser13/Designs/back.jpg
Mounting of back fan (crude design, blue = fan, green = spacer, red = mounting hole):
http://i5.photobucket.com/albums/y189/prosser13/Designs/backfan.jpg
Measurement of the back panel, showing why fan won't fit and giving an idea of where spacers will be:
http://i5.photobucket.com/albums/y189/prosser13/Designs/DSC01427.jpg
Colour scheme:
Outside: Metallic red
Inside: Black
Lighting: Blue (from LED strips), UV (from LED strips)
Cable sleeving: Black
More to come, this is just a basic idea - need to get the acrylic panel on the right side for the lights designed, chose a fan grill for the top which I can actually afford (the MNPCTech one is $60 + shipping to the UK, not sure I can afford it) - I'll get the designs of the LED light strips done and up soon (need a reply from D3D), same for the internal design; I'm moving the hard drive bays above the PSU, the screws in the top (2 of which are power/HDD LEDs) hold that in place.
So, thoughts please ;)